Shopping has officially begun at the Royaboya Handmade Bazaar! Shopping is all happening off of Facebook this time around, so it's super easy. Just visit https://www.royaboyahandmadebazaar.com/
Here's a reminder of a few things Larkin has exclusively available there... and there are lots of amazing products from other small, handmade businesses, too! I found a pretty amazing ceramic mug with tentacles that I couldn't pass up ;)
We have a lot of wild roses on our forest floor, and Larkin has paid them wonderful homage with these stud earrings!
The petals of these blooms are hand-cut from sheet copper then shaped, rounded and textured to petal-goodness perfection. The center and post are formed from argentium silver then soldered into place.
Each bloom is about 8 mm in diameter. The copper is untreated and can be kept polished bright or left to develop a natural patina over time.
What's that you say? These would make a lovely addition to a pendant design? Stay tuned, friends... stay tuned. ;)
These and many other new designs will be making their debut this week at the Royaboya Handmade Bazaar!
It's a sword... it's a ring... it's a sword ring!
These hand-shaped sword rings have a ton of detail, from the tip of the blade to the lab-grown garnet set in the pommel. Larkin even textured the metal of the grip to appear as if it is wrapped in traditional leather. Perfect for D&D players, SCA members, LARPers, cosplayers, aspiring knights, and other assorted fans of fantasy! ;)
The sword blade is 4mm wide and the ring's widest point where the blade tip meets the guard is about 1.6 cm. These will be custom made to size and available later this week at the Royaboya Handmade Bazaar!
Sound off, it won’t improve your experience at all. ;)
This video is Larkin casting a cylindrical silver ingot. They keep every little bit of silver trim and scrap wire, then melt it down to use again. Right now, Larkin mostly turns the ingots into sheet metal or larger gauges of shaped bands for things like rings-- both a big investment if you buy them pre-made.
It's pretty darn neat watching the silver turn red then melt!
Larkin made a little modification to these cat earrings. Apparently they sometimes shifted and hung from their rear end... which, you know, is kind of appropriate for cats, but maybe not in jewelry form. 😅
A small ring soldered to the tips of their ears keeps them in line. If you have a pair that sometimes flips, you can send it back and Larkin will add the ring and return it!
Today is the last day to get early bird pricing for this upcoming virtual bazaar preview party.
Why might you want to attend the preview party? Many vendors (like Larkin!) make one-of-a-kind products that will be available here first! And, all profits from ticket sales support a great cause. Hope to see you there!
Larkin shipped off a couple of Möbius rings this week and we couldn't resist checking them out stacked!
Another take on Larkin's epic lily pad pendant! This time, in addition to the lily flower, there's a dragonfly tracing swooping circles. And the back! The leaves are the perfect complement to the cattail.
The stone is a dark, gemmy applegate jade (bowenite) found by our family, and the backlit picture shows how it glows green with light behind it.
If you would like to adorn yourself with this miniature silver sculpture, it will be available later this month at the Royaboya Handmade Bazaar! Preview tickets support a Ukrainian relief fund, and give you first crack at some of these one-of-a-kind treasures!
Remember those tiny ivy leaves on the petrified wood gate wrap? Larkin biggered them! This copper cuff bracelet is 16 mm wide, with leaves slowly tapering in size from one end to the other. Some leaves hang over the edge just enough for visual interest, but not quite enough to stab a flexed wrist uncomfortably.
It has just enough flex to fit a wide range of wrist sizes-- we still need to experiment to see what the outer limits are! This is one of several pieces Larkin will have exclusively available at the upcoming Royaboya Handmade Bazaar!
Larkin is excited to be participating in the upcoming Royaboya Handmade Bazaar!
There are some changes this time around that should make shopping a little easier. While there will still be lots of games, prizes, live videos and fun in the Facebook group, actual shopping will take place at http://www.royaboyahandmadebazaar.com.
And, for the first time ever, there will be a preview party! Proceeds from ticket sales to the preview party will support GlobalGiving’s Ukraine Crisis Relief Fund and I know Larkin and some of the other vendors will be offering some one-of-a-kind specials that may not last long!
As promised, here is Larkin's latest! If you were at the gem show on Saturday, you may have seen Larkin working on the wrap that is the base of this intricate frame.
Larkin cut this magical doorway from a piece of petrified wood found by our family near our home in southern Oregon-- it's amazing how much it still looks like... well, wood! Larkin hand-cut each of the ivy leaves from copper sheet and used a chisel to give them veins and dimensionality. Each leaf is attached to the larger vine with a tiny little stem, then also soldered to the frame for stability. Sometimes when fusing or soldering copper to silver, the silver liquifies and coats part of the copper. Larkin considered polishing the silver off the leaves, but decided they liked the two-tone effect.
Which brings us to that incredible little clump of mushrooms! Each fully 3-D mushroom is hand-shaped with solid copper caps. They are super solid and soldered to each other and the frame. The way they creep out from behind the frame looks so much like the way mushrooms behave in the wild! Both leaves and mushrooms are untreated copper, so they can be kept polished bright or left to develop a natural patina over time.
And how about that back?! A neat window and decoration that looks straight out of Tolkien!
This is totally just a teaser post. Larkin finished this wrap after there was no natural light for good photos, but I am SO excited about it that I couldn't resist posting a sneak peek at what you'll be seeing in full glory tomorrow!
Local folks! Larkin was invited to demonstrate wire wrapping this weekend-- come check out all the purty rocks and say hi! Most of Larkin's designs require a fair bit of torch work these days, but they spent some time prepping torch elements so everything is ready to tie together. It's always fun to get a sneak peek at works in progress!
Larkin has finalized their Möbius ring design! This solid silver ring takes the form of a Möbius strip— a shape having only one side and one boundary curve; the simplest non-orientable surface. Larkin shaped, fused, and polished this wearable mathematical figure so it is literally seamless. ;) The argentium silver band is a “comfort band” style, slightly rounded for a more comfortable fit.
These Möbius rings are 4mm wide and can be made to fit virtually any digit! Modeled here by Emile, Larkin's dad. :)
Here's a fun design that represents the rare confluence of Larkin's two favorite pastimes: jewelry making and bowling!
One of the bowling alley moms has been super supportive of us (as homeschoolers) trying to navigate the sometimes complicated world of high school bowling. Larkin designed these as a thank you for her as she helped us understand which hoops we needed to jump through and, even more importantly, where those hoops are located. 😅
These pins are argentium silver with copper bands around the necks.
Milestones, throwback... Wednesday, website news, a give-away... bear with me y'all!
Larkin is closing in on a milestone number of website orders and thought it would be fun to celebrate the occasion with a give-away! Warning: Larkin is a weird kid so their milestone number is not one of the obvious ones! 🤣 Larkin made this septarian piece at 13, back before they were old enough to cut their own cabs at the rock shop. This is not an original design and if Larkin was going to do it over they would use thicker gauge wire. That said, it's a pretty piece and a fun little chunk of Idle Talons history!
And here's the give-away: when that milestone website order is placed (could be this week, could take a couple of months) this pendant is going to be tucked into that package! So if there's something you've been eyeing it might be time to place an order-- who knows what could arrive at your door! ;)
Speaking of the website, we've made some changes! Larkin removed some older designs (including almost all the beadwork) to focus on the direction and feel of their current work. But don't fret! (🎵You don't know what you've got 'til it's gone!🎶) If something disappeared that you suddenly can't live without, shoot us a message and I bet Larkin will be willing to hook you up.
Larkin's latest cabs! And yes, that round one is what we have officially dubbed "bowling alley" jasper. Looks kind of planetary to me... or maybe it's destined to be a bowling ball?
Remember the tiny, perfect lily flower on the recent water lily wrap? Now they're the stars of their own earrings! Larkin begins crafting these fabulous lilies by hand-cutting five layers of sheet metal silver into four petals. The five layers are staggered, petals shaped, and fused together, then finally a copper ball is set into the center. The 20 gauge hand-shaped ear wire is fused to the back. The copper center is untreated and will develop a natural patina over time.
Each step of torchwork is another opportunity for a layer of petals to rebel and slump-- on the first lily, Larkin worked the flower in halves and caused three different halves to slump before achieving the final lily. This pair was a little more cooperative (and, of course, Larkin had a bit more experience) and there were no start-all-over-catastrophic-failures.
These have been wear-tested and are quite robust, but some care should be taken when wearing them— loose knit garments may catch and snag on the petals.
Each bloom is about 1.3 cm in diameter and the total length of the earrings from the top of the ear wire to the bottom of the lily is about 2.3 cm.
Larkin and Emile finally made it back in to the shop at Crater Rock Museum to cut some new finds into slabs! I kinda dig the (mustard) yellow jasper with the bright teal and red streaks, but Larkin isn't sure there's a market for "'70s bowling alley chic." 😅
There is, however, already a suspiciously planet-shaped outline on the red jasper with black markings...
RVGCM is open until 1:30 at the Ashland Armory!
