Market Season

So... February always feels like a short month, but when the first Tuesday in March is March 1-- well, let's just say market season took us a bit by surprise this year! 😅 Local folks: Larkin will be back at the Rogue Valley Growers & Crafters Market first Tuesdays at the Ashland Armory... starting tomorrow! New hours this season: 9am-1:30pm. Larkin would love to see you there!

The last few days have been a blur of re-stocking, finding findings, making space on the board for new designs, stamping bags with the Idle Talons logo and lots of other preparations.

I also included a photo of one of Larkin's recent "wind-down" projects, pictured next to that sweet tiny silver lily before it was affixed to a wrap. Meet "Crumb," a baby amigurumi octopus crocheted with a single strand separated from 6-ply embroidery floss. This craft is recommended only for the young of eyes. ;)

Applegate Jade Lily Pad

Holy cow, people! Larkin's work is getting more sculptural all the time-- check out this perfect three-dimensional lily flower! And those cat tails! This round applegate jade cabochon is semi-translucent and full of deep, rich greens. Larkin framed it in a silver lily pad that has been wrapped, sculpted, fused, and accented with copper.

This piece is definitely more delicate than any other piece Larkin has made to date! Larkin is usually very careful to make sure their finished products are robust enough to stand up to daily wear, but this lily had to be made. ;) While the lily's petals are not dangerously sharp, the lily flower is very 3-dimensional and could easily snag on a loose-knit garment.

Vining Leaf Earrings

A new earring design! Larkin started this design with a single 20 gauge silver wire. The back of the ear hook becomes part of the design as it gracefully swoops behind the ear lobe. Larkin cut the delicate leaves from sheet metal and fused them into place. The copper leaves are untreated and can be kept polished bright or left to develop a natural patina.

Each earring measures about 2.6 cm long and 0.9 cm at its widest point.

New Leaf Earrings!

New leaf earrings are up! Larkin makes matching pairs by rough cutting the cabochons while two slabs are adhered together. Then the pairs are separated for the final doming and polishing.

These beauties are surprisingly light— even the large leaves weigh slightly less than a U.S. quarter! Each leaf hangs from a handmade ear wire. This collectionincludes "applegate jade" (bowenite), banded jasper, and serpentine. Two pairs of applegate jade are very dark to the naked eye, and glow a deep gemmy green when back-lit-- the second photo shows a pair with sunshine shining through it!

Superrock Sunday

While the rest of the world was apparently watching some football game (or maybe it was a concert?), we spent a blissfully secluded Sunday out in the Applegate. I spotted: a rare glimpse of a teen rock gnome in their natural element, a very happy dryad cyclops, a similarly satisfied adult rockhound, and a GORGEOUS sunset. I also included a picture of the road. Why, you ask? That big rock in the middle? It's applegate jade! We left it, because... well, it was road! But it's interesting to see how innocuous and easy to overlook it is in its natural state. Larkin is pretty excited to slab up some of our new finds!

Copper Ring Prototype

Larkin has been wanting to play with rings for a long time and has finally collected (most) of the tools to make it possible! This is a copper-banded prototype with silver vines, leaves, and stone setting. The faceted stone is a lab created garnet. The whole thing is oxidized dark, then Larkin hand-polished the silver back to bright. It's interesting-- to the naked eye the ring looks uniformly sleek and shiny, but in these full sun close-ups the color is uneven and it looks a bit like it was bested in a brawl.

Larkin loves the look of the dark copper, but so many people react to the metal it doesn't seem practical to offer copper rings. If there are any jewelers here with tips on how to treat oxidized copper so it won't react with with skin, we'd love to hear them-- we know some people recommend clear nail polish or waxes, but it's important to Larkin not to use anything that will discolor or degrade over time.

Someone's In The Details...

Sometimes this kid just can't leave well enough alone... 😅

Larkin couldn't stop thinking about a decorative bail to match this recent applegate jade piece, so finally sat down with the torch to make one. It's a pinch-style bail, but Larkin fused the tip to ensure the join was super secure. This involved removing the stone, doing the torchwork, pickling the piece to remove any scorch marks, re-polishing, and tying the stone back in again. But now it's perfect. ;)

Air Supply

Larkin had an order for an "air" pendant and realized it was time to re-stock. Avatar: The Last Airbender has been a huge hit with our whole family, and we heartily recommend it to anyone who loves cartoons! The show inspired three years of Halloween costumes for Larkin: Katara (Larkin is 9, guest appearance by their 7-year-old brother Finn as a Minecraft pig), Toph (age 10, probably still Larkin's favorite character), and Zuko (age 14).

Larkin translated the Avatar elements beautifully into wire!

Springtime Applegate Jade

Larkin just finished another piece from that hunk of applegate jade I just can't seem to stop waxing poetic about! 😅 This is not the highest gem-quality specimen, but our whole family loves the patterned swirls of lighter and darker green. Some areas of this stone are opaque, and some glow translucent green when back-lit.

Larkin spent a *ton* of time with the torch, sculpting and fusing elements of the frame so the final wrap would complement the feel of the stone. This piece has beautifully dainty details while feeling solid and sturdy in the hand. The stone in the middle photo is the one from which Larkin cut the cab. Thank goodness we still have about half-a-loaf-of-bread worth of the raw stone still uncut! (I'm pretty sure that's the accepted lapidary measurement scale...)

Cat Earrings

After a brief, long-awaited visit with grandparents (including our family's final Xmas celebrations 😅), Larkin is back at work! These sweet little feline companions are individually handmade and each has a unique personality. They are shaped from a single piece of wire, then fused or soldered to assure sturdiness and that they won’t snag. Available in copper (left), oxidized dark and polished, or argentium silver (right) polished and gleaming bright. Ready for adoption now!

What's The Opposite Of Artist's Block?

Me, wearing my Social Media Manager hat: Larkin. Would you please just finish *something* so I can make a post?

Larkin: Hang on, I have an idea...

Artists, amiright? 😅💕

Applegate Jade Doublet

Today's experiment was another doublet (well, technically doublets take multiple days due to the time it takes for the epoxy to cure, but bear with me 😅). Larkin backed a very thin disk of the deep, gemmy applegate jade with quartz. Such thin stone is very brittle on its own, so the quartz helps to stabilize it, and the clear/white allows the green to really shine!

In the first picture you can see how thin the layer of green stone really is where it meets the quartz-- and that's the raw applegate jade in the background! The top view shows the cab perched on a hunk of petrified wood.

Leaf Cabs

Larkin put in a lot of time on the Genie the last couple of days making all these leaves! Most of these are paired to be leaf earrings-- getting the stone and shape to match well definitely adds some time and challenge to the process. There's lots of applegate jade here, some really deep gemmy stone and some that have more inclusions, jasper, serpentine, and that banded red-pink jasper/agate.

Gallery Milestone

We recently had some pretty exciting news: The very first sale made by the Crooked Mile Gallery after they opened was a pair of Larkin's silver ribbon earrings! There's definitely something to be said for simple elegance and clean lines!

Rose Quartz Moon

A new wrap! And, dare I say, worth the wait! ;) Larkin cut this round cabochon from a slab of rose quartz that was cut diagonal to a band of clearer quartz. When domed and polished, the cab contains a distinctive moon shape! The stone's true color is best depicted in this picture, taken in full sun.

Larkin framed this piece almost entirely in silver with a contrasting arch of copper in the frame on the non-wrapped edge. The back is fashioned to suit the front, with a silver crescent moon and a curling vine with copper leaves. I keep thinking this piece evokes a fairy moon from an ancient illuminated manuscript!

Flex Shaft

One of Larkin's new toys (<ahem>, I mean tools) is a flex shaft. For those of you who (like me) are new to all things jewelry making, it's kind of like a wired dremel with a smaller, pen-like body for greater control and dexterity. It's operated with a foot pedal, like a sewing machine, leaving both hands free to manipulate whatever you're working on.

Also like a dremel, it has lots of interchangeable bits for sculpting and polishing metal and stone. Larkin has been wanting to play with setting faceted stones, and here is a first try at flush setting a lab-created garnet in scrap copper.

This tool opens up a ton of new possibilities and I can't wait to see what comes next!

What We Did On Our Winter Vacation

First things first, Larkin turned 17! Woot! And yes, the candle math works out on the birthday popsicle because we lit the popsicle stick on fire when we ran out of candles.

Then we were snowed in for a week as the result of a very uncharacteristically serious snowstorm for our area. Larkin and their younger brother, Finn, made a pretty epic sled run down our driveway and built an ice cave around a large hole so that it is (wait for it...) much bigger on the inside than it is on the outside! Snow here almost always means several days without electricity, so we drank a lot beverages heated on the wood stove and played many rounds of card and board games by solar lantern.

The biggest Idle Talons news came in the form of an *amazing* offer by a neighbor in our local Buy Nothing group! This ginormous, 3-piece, just because it's in 3 pieces doesn't make it any lighter, BEAUTIFUL (have I mentioned heavy?) desk is well on its way to being converted to the jeweler's bench Larkin has been dreaming of!

Moving that sucker upstairs, then reorganizing Larkin's workspace almost entirely into it has been an enormous job, but obviously worth it as Larkin kept being distracted by having so many tools easily to hand and pausing set-up to try out new ideas.

A new wrap is in the works, as well as lots of fun new experiments that will expand Larkin's repertoire considerably. Stay tuned!

Purrfect Earrings

Hi everyone! We took a bit of a social media break over the holidays, but will have a longer update soon about some exciting new additions to the Idle Talons studio. We hope this finds you happy and healthy in the new year!

Meanwhile, Larkin recently had a request for some wire cats and these silver line art lovelies turned out pretty charming!

Bowling For... Hummingbirds?

Larkin's top favorite bowling alley employee is an amazing guy. He takes donated equipment from more experienced bowlers and passes them on to kids-- it is *amazing* to see kids improve when they have their own custom-fit bowling balls and shoes! He knows *everyone's* names, loves the game, and wants everyone to succeed. He's not a jewelry guy, but Larkin found out his wife has a soft spot for hummingbirds and designed this sweet little pendant especially for her. Cheers to Ken!

Humboldt Chert Shell

Here's a new piece hot off Larkin's workbench! Larkin cut this beautiful blue-green cab from a chert stone our family found on the northern California coast. Larkin wanted the wrap to have an aquatic shell kind of feel, very appropriate for a stone formed by oceanic processes! Larkin shaped the frame with a combination of wrapping and soldering argentium silver. Larkin oxidized the wrap, then polished the exposed wire back to shining to give it a bit more depth and dimension.