Idle Talons

product

Copper Ivy Cuff Bracelet

process, product, venuesLarkin HamiltonComment

Remember those tiny ivy leaves on the petrified wood gate wrap? Larkin biggered them! This copper cuff bracelet is 16 mm wide, with leaves slowly tapering in size from one end to the other. Some leaves hang over the edge just enough for visual interest, but not quite enough to stab a flexed wrist uncomfortably.


It has just enough flex to fit a wide range of wrist sizes-- we still need to experiment to see what the outer limits are! This is one of several pieces Larkin will have exclusively available at the upcoming Royaboya Handmade Bazaar!

Petrified Wood Gate

musings, process, product, venuesLarkin HamiltonComment

As promised, here is Larkin's latest! If you were at the gem show on Saturday, you may have seen Larkin working on the wrap that is the base of this intricate frame.

Larkin cut this magical doorway from a piece of petrified wood found by our family near our home in southern Oregon-- it's amazing how much it still looks like... well, wood! Larkin hand-cut each of the ivy leaves from copper sheet and used a chisel to give them veins and dimensionality. Each leaf is attached to the larger vine with a tiny little stem, then also soldered to the frame for stability. Sometimes when fusing or soldering copper to silver, the silver liquifies and coats part of the copper. Larkin considered polishing the silver off the leaves, but decided they liked the two-tone effect.

Which brings us to that incredible little clump of mushrooms! Each fully 3-D mushroom is hand-shaped with solid copper caps. They are super solid and soldered to each other and the frame. The way they creep out from behind the frame looks so much like the way mushrooms behave in the wild! Both leaves and mushrooms are untreated copper, so they can be kept polished bright or left to develop a natural patina over time.

And how about that back?! A neat window and decoration that looks straight out of Tolkien!

Wire Wrapping Demo

fun, product, venues, processLarkin HamiltonComment

Local folks! Larkin was invited to demonstrate wire wrapping this weekend-- come check out all the purty rocks and say hi! Most of Larkin's designs require a fair bit of torch work these days, but they spent some time prepping torch elements so everything is ready to tie together. It's always fun to get a sneak peek at works in progress!

Silver Möbius Ring

musings, process, productLarkin HamiltonComment

Larkin has finalized their Möbius ring design! This solid silver ring takes the form of a Möbius strip— a shape having only one side and one boundary curve; the simplest non-orientable surface. Larkin shaped, fused, and polished this wearable mathematical figure so it is literally seamless. ;) The argentium silver band is a “comfort band” style, slightly rounded for a more comfortable fit.

These Möbius rings are 4mm wide and can be made to fit virtually any digit! Modeled here by Emile, Larkin's dad. :)

Bowling Pin Earrings

fun, musings, productLarkin HamiltonComment

Here's a fun design that represents the rare confluence of Larkin's two favorite pastimes: jewelry making and bowling!

One of the bowling alley moms has been super supportive of us (as homeschoolers) trying to navigate the sometimes complicated world of high school bowling. Larkin designed these as a thank you for her as she helped us understand which hoops we needed to jump through and, even more importantly, where those hoops are located. 😅

These pins are argentium silver with copper bands around the necks.

Milestones, Website News, More!

fun, musings, process, product, venuesLarkin HamiltonComment

Milestones, throwback... Wednesday, website news, a give-away... bear with me y'all!

Larkin is closing in on a milestone number of website orders and thought it would be fun to celebrate the occasion with a give-away! Warning: Larkin is a weird kid so their milestone number is not one of the obvious ones! 🤣 Larkin made this septarian piece at 13, back before they were old enough to cut their own cabs at the rock shop. This is not an original design and if Larkin was going to do it over they would use thicker gauge wire. That said, it's a pretty piece and a fun little chunk of Idle Talons history!

And here's the give-away: when that milestone website order is placed (could be this week, could take a couple of months) this pendant is going to be tucked into that package! So if there's something you've been eyeing it might be time to place an order-- who knows what could arrive at your door! ;)

Speaking of the website, we've made some changes! Larkin removed some older designs (including almost all the beadwork) to focus on the direction and feel of their current work. But don't fret! (🎵You don't know what you've got 'til it's gone!🎶) If something disappeared that you suddenly can't live without, shoot us a message and I bet Larkin will be willing to hook you up.

Water Lily Earrings

musings, process, productLarkin HamiltonComment

Remember the tiny, perfect lily flower on the recent water lily wrap? Now they're the stars of their own earrings! Larkin begins crafting these fabulous lilies by hand-cutting five layers of sheet metal silver into four petals. The five layers are staggered, petals shaped, and fused together, then finally a copper ball is set into the center. The 20 gauge hand-shaped ear wire is fused to the back. The copper center is untreated and will develop a natural patina over time.

Each step of torchwork is another opportunity for a layer of petals to rebel and slump-- on the first lily, Larkin worked the flower in halves and caused three different halves to slump before achieving the final lily. This pair was a little more cooperative (and, of course, Larkin had a bit more experience) and there were no start-all-over-catastrophic-failures.

These have been wear-tested and are quite robust, but some care should be taken when wearing them— loose knit garments may catch and snag on the petals.

Each bloom is about 1.3 cm in diameter and the total length of the earrings from the top of the ear wire to the bottom of the lily is about 2.3 cm.

Market Season

musings, process, product, venues, funLarkin HamiltonComment

So... February always feels like a short month, but when the first Tuesday in March is March 1-- well, let's just say market season took us a bit by surprise this year! 😅 Local folks: Larkin will be back at the Rogue Valley Growers & Crafters Market first Tuesdays at the Ashland Armory... starting tomorrow! New hours this season: 9am-1:30pm. Larkin would love to see you there!

The last few days have been a blur of re-stocking, finding findings, making space on the board for new designs, stamping bags with the Idle Talons logo and lots of other preparations.

I also included a photo of one of Larkin's recent "wind-down" projects, pictured next to that sweet tiny silver lily before it was affixed to a wrap. Meet "Crumb," a baby amigurumi octopus crocheted with a single strand separated from 6-ply embroidery floss. This craft is recommended only for the young of eyes. ;)

Applegate Jade Lily Pad

musings, process, productLarkin HamiltonComment

Holy cow, people! Larkin's work is getting more sculptural all the time-- check out this perfect three-dimensional lily flower! And those cat tails! This round applegate jade cabochon is semi-translucent and full of deep, rich greens. Larkin framed it in a silver lily pad that has been wrapped, sculpted, fused, and accented with copper.

This piece is definitely more delicate than any other piece Larkin has made to date! Larkin is usually very careful to make sure their finished products are robust enough to stand up to daily wear, but this lily had to be made. ;) While the lily's petals are not dangerously sharp, the lily flower is very 3-dimensional and could easily snag on a loose-knit garment.

Vining Leaf Earrings

process, productLarkin HamiltonComment

A new earring design! Larkin started this design with a single 20 gauge silver wire. The back of the ear hook becomes part of the design as it gracefully swoops behind the ear lobe. Larkin cut the delicate leaves from sheet metal and fused them into place. The copper leaves are untreated and can be kept polished bright or left to develop a natural patina.

Each earring measures about 2.6 cm long and 0.9 cm at its widest point.

New Leaf Earrings!

musings, process, productLarkin HamiltonComment

New leaf earrings are up! Larkin makes matching pairs by rough cutting the cabochons while two slabs are adhered together. Then the pairs are separated for the final doming and polishing.

These beauties are surprisingly light— even the large leaves weigh slightly less than a U.S. quarter! Each leaf hangs from a handmade ear wire. This collectionincludes "applegate jade" (bowenite), banded jasper, and serpentine. Two pairs of applegate jade are very dark to the naked eye, and glow a deep gemmy green when back-lit-- the second photo shows a pair with sunshine shining through it!

Someone's In The Details...

musings, process, productLarkin HamiltonComment

Sometimes this kid just can't leave well enough alone... 😅

Larkin couldn't stop thinking about a decorative bail to match this recent applegate jade piece, so finally sat down with the torch to make one. It's a pinch-style bail, but Larkin fused the tip to ensure the join was super secure. This involved removing the stone, doing the torchwork, pickling the piece to remove any scorch marks, re-polishing, and tying the stone back in again. But now it's perfect. ;)

Air Supply

fun, musings, productLarkin HamiltonComment

Larkin had an order for an "air" pendant and realized it was time to re-stock. Avatar: The Last Airbender has been a huge hit with our whole family, and we heartily recommend it to anyone who loves cartoons! The show inspired three years of Halloween costumes for Larkin: Katara (Larkin is 9, guest appearance by their 7-year-old brother Finn as a Minecraft pig), Toph (age 10, probably still Larkin's favorite character), and Zuko (age 14).

Larkin translated the Avatar elements beautifully into wire!

Springtime Applegate Jade

musings, process, productLarkin HamiltonComment

Larkin just finished another piece from that hunk of applegate jade I just can't seem to stop waxing poetic about! 😅 This is not the highest gem-quality specimen, but our whole family loves the patterned swirls of lighter and darker green. Some areas of this stone are opaque, and some glow translucent green when back-lit.

Larkin spent a *ton* of time with the torch, sculpting and fusing elements of the frame so the final wrap would complement the feel of the stone. This piece has beautifully dainty details while feeling solid and sturdy in the hand. The stone in the middle photo is the one from which Larkin cut the cab. Thank goodness we still have about half-a-loaf-of-bread worth of the raw stone still uncut! (I'm pretty sure that's the accepted lapidary measurement scale...)

Cat Earrings

fun, musings, process, productLarkin HamiltonComment

After a brief, long-awaited visit with grandparents (including our family's final Xmas celebrations 😅), Larkin is back at work! These sweet little feline companions are individually handmade and each has a unique personality. They are shaped from a single piece of wire, then fused or soldered to assure sturdiness and that they won’t snag. Available in copper (left), oxidized dark and polished, or argentium silver (right) polished and gleaming bright. Ready for adoption now!

Rose Quartz Moon

musings, process, productLarkin HamiltonComment

A new wrap! And, dare I say, worth the wait! ;) Larkin cut this round cabochon from a slab of rose quartz that was cut diagonal to a band of clearer quartz. When domed and polished, the cab contains a distinctive moon shape! The stone's true color is best depicted in this picture, taken in full sun.

Larkin framed this piece almost entirely in silver with a contrasting arch of copper in the frame on the non-wrapped edge. The back is fashioned to suit the front, with a silver crescent moon and a curling vine with copper leaves. I keep thinking this piece evokes a fairy moon from an ancient illuminated manuscript!

Purrfect Earrings

musings, process, productLarkin HamiltonComment

Hi everyone! We took a bit of a social media break over the holidays, but will have a longer update soon about some exciting new additions to the Idle Talons studio. We hope this finds you happy and healthy in the new year!

Meanwhile, Larkin recently had a request for some wire cats and these silver line art lovelies turned out pretty charming!