Idle Talons

product

Lapis Lazuli Marquise

musings, process, productLarkin HamiltonComment

Larkin cut and polished this marquise cab from a piece of lapis lazuli gifted by a fellow rock enthusiast at Crater Rock Museum. The long swirls of wrapped and fused argentium silver are lovely, and Larkin is considering turning this design on its side with beefier copper wire as a hair clip design. (I'll take one in applegate jade please, Larkin!)

Worried about it flipping over while being worn? Larkin has you covered: the back is gorgeous, too! This piece measures 8.5 cm long and and 1.8 cm at its widest point.

SKU0050-wildrose.1500.jpg
SKU0050-back.1500.jpg

Brick and Mortar, Yo!

venues, product, musingsLarkin HamiltonComment

Local rock shop Dragon Crystals invited Larkin to return as their October artist of the month! If you're local, this is a great chance to see some of Larkin's work in person. These good folks lost their Talent shop to last year's Almeda fire and have re-opened at 107 W 1st St in Phoenix. It feels so official to have a display in a local brick and mortar shop!

temp2.jpg
temp.jpg
temp3.jpg

Möbius Rings

fun, musings, process, productLarkin HamiltonComment

When I was a wee bairn of probably 3-4, my dad brought me a loop of paper and asked me to color one side red and the other side blue. I noticed it was twisted and pointed this out to him before getting down to work, but he said he didn't mind. I started on the blue side and had almost completely colored the whole thing before I realized I had, yet again, fallen victim to a mathematical practical joke.

Larkin made Möbius rings! That's right: rings that, through the awesome powers of mathematics, have only one face and one edge. The one on the left is a thinner comfort band ring, and the one on the right is a slightly thicker, squarer wire where Larkin polished the twist at the edge. These are copper prototypes (the final product will be in silver) and our family is split on which we prefer-- what do you think?

Side note: Larkin's mathematician grandpa is angling for Klein bottle earrings to go with these. ;)

temp.jpg
temp2.jpg

Local Quartz

process, productLarkin HamiltonComment

A "scarf" style wrap in argentium silver around a neighbor's tumble polished stone. This is a fun way to hang smaller stones that might not be suitable for cabbing! And with this piece, Larkin's current commissions are complete! If you have a project you'd like done before the winter holidays, now would be a good time to get in touch! 😉

SKU0048-leaf.1500.jpg

First Wholesale Order

musings, process, product, venuesLarkin HamiltonComment

<Phew> This little bin represents a ton of work! This is the first batch of Idle Talons stock purchased by a local art gallery-- we'll let you know when they open! If you or someone you know would like an Idle Talons display in your brick and mortar business, send us a message and Larkin will fill you in on wholesale pricing. Larkin has two commissions to finish up, then it's time for some well-earned creative free play.

temp.jpg

River Stone Scroll

musings, process, productLarkin HamiltonComment

Larkin cut this cabochon from a small stone our family found in the Applegate— before we knew how to spot applegate jade! 😅 It’s a beautiful grey-green with white and black striations, but we're not entirely sure what its actual mineral composition is. Larkin wrapped the unique cab in swooping silver scrollwork. I'm still really loving the wire doodles on the backs of Larkin's recent work!

We know we've been quieter than usual, but it's not because Larkin has been slacking! A local gallery owner is planning an Idle Talons display, so Larkin has been working hard on filling their large wholesale order... plus, summer market season is still in full swing. Larkin is enjoying this seasonal production work, but is looking forward to having a little more time to play with some new designs and techniques!

SKU0046-leaves.1500.jpg
SKU0046-back.1500.jpg

Owl Be Darned

fun, musings, process, product, venuesLarkin HamiltonComment

Another trip to the coast to get out of the wildfire smoke! Not a bad office view, eh?

temp2.jpg

Larkin is working on a design for a repeat customer at the Rogue Valley Growers & Crafters Market who likes to get something special for his daughter every month. He was hoping for an owl next. What do you think, cute caricature on the left or essence-capturing line work on the right?

temp.jpg

Speaking Of Books...

musings, process, product, venuesLarkin HamiltonComment

Gah! This is the sweetest! This is the book Larkin showed in the live video this morning before it had been oxidized and polished! This is made entirely out of copper and brass sheet metal, plus silver solder. It is hollow, so quite lightweight.

The copper cover is textured to look like aged leather, and the brass name plates are polished bright. The texture of the pages was created by scoring brass sheet metal with a knife blade. And yes, that *is* a jaunty little bookmark.

It's tiny! Measures 3cm tall (including the bookmark), 2.3 cm wide, and 0.8 cm thick.

book-spine.1500.jpg
book-pages.1500.jpg
book-cover.1500.jpg
book-goodcompany.1500.jpg

Applegate Jade Wrap

process, product, venuesLarkin HamiltonComment

Here's another applegate jade piece that shows just how versatile that stone is! It's almost black in the shade, deep green in bright light, and translucent green when back-lit! Larkin cut this cab from a stone our family found and wrapped it in swoops and swirls of oxidized copper. The finished piece measures 4.4 cm long and 3.2 cm at its widest point.

This piece will be available starting Friday at the Royaboya Handmade Bazaar, and if you visit the group at 11am Friday Larkin will be speaking a bit about how books and the written language have influenced Idle Talons!

SKU0045-hand.1500.jpg
SKU0045-backlit.1500.jpg
SKU0045-back.1500.jpg

Moss Agate Dragon Tail

musings, process, product, venuesLarkin HamiltonComment

Inspired by a Facebook comment, Larkin created this dragon tail wrap! Larkin cut the distinctive moss agate cabochon from a slab gifted by a friend. The stone is partly transparent when back-lit, so Larkin kept the back simple to let the light shine through unhindered.

The inside of the frame and circlet holding it in place on back are argentium silver, and the spines and tail end are copper. Larkin hand-shaped the tail from sheet metal and fused it in place. The main join on the body of the wrap is also fused so the stone can sit flush against the wires. Measures 6.6 cm long and 4.2 cm at its widest point.

This piece will make its debut at the Royaboya Handmade Bazaar this Friday! Tune in there for this and the story of how the evolution of Idle Talons would not have been possible without books!

SKU0044-leaf.1500.jpg
SKU0044-through.artichokes.1500.jpg

Mermaid Tail Retrospective

fun, musings, process, productLarkin HamiltonComment

Alternative title: Larkin Doesn't Like Doing The Same Thing Twice

This first photo is Larkin's proof of concept piece, the very first Idle Talons mermaid tail on blue aventurine made in April of 2019 (for those keeping track, this was when Larkin was 14).

mermaidtail-outside.1500.jpg

Next came a silver tail on seraphinite, a very similar style as the first because Larkin was not yet ready to jump into new designs in spendier silver wire.

seraphinitemermaid-flowers.1500.jpg

Then another blue aventurine piece, this time wrapped in silver with a different tail position.

SKU0014-stone.1500.jpg

Next came a copper tail on fossilized coral, again with similar design elements tweaked in new ways.

SKU0020-tree.1500.jpg

Finally the brecciated jasper tail Larkin finished yesterday.

SKU0043-sun.stone.1500.jpg

Each piece has so many similar elements, yet is totally unique as Larkin made changes to suit the stone and cab shape. This makes me want to collect other styles for a side-by-side comparison! Maybe trees next...

Brecciated Jasper Mermaid

process, musings, productLarkin HamiltonComment

I have two favorite stones found by our family so far: this one, and a particular piece of applegate jade. Larkin cut this phenomenally striking brecciated jasper cab from a rock we found on the northern California coast. The copper mermaid tail setting combined with the stone is like a perfect marriage between water and fire! Larkin has really been enjoying making (very labor intensive) wire doodles to hold the stone in place on the back of the wrap, and this one formed from fused argentium silver turned out beautifully.

SKU0043-sun.stone.1500.jpg
SKU0043-back.stone.1500.jpg

Rose Drops and Books

fun, musings, process, product, venuesLarkin HamiltonComment

... and the sort-of-companion earrings to yesterday's pendants are up on the website for the first time, too! It's so fun seeing the different colors jump out in oxidized silver.

On a slightly different note: Larkin has a book-themed bazaar coming up and is looking for ideas! Are decorative sheet metal bookmarks a thing? Are there specific fandoms you think might translate well into Larkin's style? A product we haven't thought of that might particularly suit readers and/or authors? The fun thing about throwing lots of ideas at Larkin is seeing the results for the ones that stick! ;)

collection-wall.1500.jpg

Rose Wreaths

product, venuesLarkin HamiltonComment

These sweet vining rose pendants have been showcased only at special markets, and are finally available on the website! See these and all sorts of other goodies Larkin has been working on tomorrow at the Rogue Valley Growers & Crafters Market! The Idle Talons booth will be set up from 8:30am-1:30pm at the Ashland Armory.

collection-wall.1500.jpg

Chert Blues

process, productLarkin HamiltonComment

We are visiting grandparents at the coast, and Larkin was inspired to finish a wrap on this cab cut from a beautiful blue-green chert we found here on a previous trip! Silver swoops and swirls mirror some of the darker lines in the stone. Bonus: it's always nice finding new photography backgrounds away from home. :)

SKU0042-cone.1500.jpg

Applegate Jade Vines

musings, process, productLarkin HamiltonComment

Larkin cut this asymmetric cabochon from one of our favorite applegate jade finds, then used a combination of wrapping and fusing to frame it in sweet silver vines. Pictured with the stone from which it was cut, plus one photo to show how gloriously gleamy it is in sunshine. Larkin's grandpa gets first right of refusal on this beauty, the lucky devil!

SKU0041-slab.1500.jpg
SKU0041-back.1500.jpg
SKU0041.1500.jpg