Larkin's latest piece is this brilliant blue sodalite framed with a combination of wrapping and fusing in argentium silver. I said the stone in the wrap looked positively galactic with timey-wimey space waves and swirls and now I think Larkin is looking for a new copy writer. š I didn't even point out that the blue in the stone was, in fact, TARDIS blue...
process
Vining Applegate Jade
musings, process, productCommentAnother piece using one of my favorite applegate jades found by our family! This particular swirly green stone has veins of translucence, but is mostly opaque. The picture with a gravel background was taken in direct sun and best shows the colors and patterns in the stone.
Oh yeah, and it's not *all* about the stone. š Larkin set the cab in gleaming silver that has been shaped, fused, and wrapped into its final form. It's like an explosion of new growth! Measuring in at 6.6 cm long and 6 cm at its widest point, this is a gorgeous, bold statement piece.
Idle Talons News Update
musings, processCommentThere's a new "about the artist" page up here on the Idle Talons website! If you're new here, it might answer some questions about Larkin's craft. :) And Larkin is gratefully taking suggestions if there's something else you'd like to know! https://www.idletalons.com/about-the-artist
We've been trying hard not to put the cart before the horse, but a national lapidary magazine is due to publish an article about Larkin's work in their December issue!!! This issue may come out as soon as November 1, so if you've had your eye on a particular piece you may want to make your move before Idle Talons is brought to the attention of a much wider audience! More info on the article when we have it in our hot little hands!
Applegate Jade Tree
process, productCommentWeāve been calling this stone āhalf-cookedā applegate jadeā itās a beautiful green base with orange-yellow speckles, and is translucent at the thin edges of the cabochon.
Larkin has been frustrated with how messy the back of a tree of life usually is since each branch needs to be individually tied off on the back of the piece. For this piece, Larkin soldered each of the 72 wire ends of the copper tree to the inside of the frame, allowing a more decorative back than usual. This took a Very Long Time and may or may not ever happen again.
The twisted rope and tire swing are constructed from argentium silverā and the swing actually swings from the branch!
Lavender Quartz Jellyfish
musings, process, productCommentLarkin cut this uniquely shaped cabochon from a rose quartz stone with more flashy blue in it than most, which the folks at our local rock shop affectionately dubbed ālavenderā quartz. The frame and curling tendrils are constructed with a combination of wrapping and fusing, resulting in a piece that is amazingly sturdy while capturing the dainty, ethereal spirit of a jellyfish! Even the back features whimsical underwater bubbles!
Those spiraling tendrils were a labor of love! Larkin flattened 14 gauge wire slightly with the rolling mill, softened them with the torch and rounded the ends, shaped the curls, trimmed them with the jeweler's cab, filed the ends to fit the edge of the wrap exactly, then fused them to the frame while keeping all fingers and toes crossed that none of the metal was going to slump. Just in case you were wondering.
New Dragon Eyes
musings, process, productCommentLarkin has been restocking dragon eyes! These are always most popular at in-person events and I can't help but think that's because it's so hard to capture their detail and personality in photos.
Lapis Lazuli Marquise
musings, process, productCommentLarkin cut and polished this marquise cab from a piece of lapis lazuli gifted by a fellow rock enthusiast at Crater Rock Museum. The long swirls of wrapped and fused argentium silver are lovely, and Larkin is considering turning this design on its side with beefier copper wire as a hair clip design. (I'll take one in applegate jade please, Larkin!)
Worried about it flipping over while being worn? Larkin has you covered: the back is gorgeous, too! This piece measures 8.5 cm long and and 1.8 cm at its widest point.
Stone Cold Bouquet
musings, processCommentLarkin put in a seriously long day of stone work yesterday. This isn't even all of them, but I love the way the cabs still on dop sticks look like a bouquet! It's looking like leaves will be back in stock soon-- and check out that wire wrapper's manicure! š
Moss Agate Tree Of Life
musings, process, productCommentOkay summer, we're done with you! š This latest piece is quintessentially autumnal. Larkin cut this moss agate cabochon from a slab gifted by a friend. The cab boasts gorgeous, earthy reds and yellowsā the perfect backdrop for an intricate tree of life.
Mƶbius Rings
fun, musings, process, productCommentWhen I was a wee bairn of probably 3-4, my dad brought me a loop of paper and asked me to color one side red and the other side blue. I noticed it was twisted and pointed this out to him before getting down to work, but he said he didn't mind. I started on the blue side and had almost completely colored the whole thing before I realized I had, yet again, fallen victim to a mathematical practical joke.
Larkin made Mƶbius rings! That's right: rings that, through the awesome powers of mathematics, have only one face and one edge. The one on the left is a thinner comfort band ring, and the one on the right is a slightly thicker, squarer wire where Larkin polished the twist at the edge. These are copper prototypes (the final product will be in silver) and our family is split on which we prefer-- what do you think?
Side note: Larkin's mathematician grandpa is angling for Klein bottle earrings to go with these. ;)
Local Quartz
process, productCommentA "scarf" style wrap in argentium silver around a neighbor's tumble polished stone. This is a fun way to hang smaller stones that might not be suitable for cabbing! And with this piece, Larkin's current commissions are complete! If you have a project you'd like done before the winter holidays, now would be a good time to get in touch! š
Local Commission
process, productCommentAnother custom piece for a neighbor who found this stone on their property. The reds and greens really polished up beautifully! This is another frame for which Larkin used a hybrid of wrapping and torch work, which helps minimize the bulk of pure wrapping.
First Wholesale Order
musings, process, product, venuesComment<Phew> This little bin represents a ton of work! This is the first batch of Idle Talons stock purchased by a local art gallery-- we'll let you know when they open! If you or someone you know would like an Idle Talons display in your brick and mortar business, send us a message and Larkin will fill you in on wholesale pricing. Larkin has two commissions to finish up, then it's time for some well-earned creative free play.
River Stone Scroll
musings, process, productCommentLarkin cut this cabochon from a small stone our family found in the Applegateā before we knew how to spot applegate jade! š Itās a beautiful grey-green with white and black striations, but we're not entirely sure what its actual mineral composition is. Larkin wrapped the unique cab in swooping silver scrollwork. I'm still really loving the wire doodles on the backs of Larkin's recent work!
We know we've been quieter than usual, but it's not because Larkin has been slacking! A local gallery owner is planning an Idle Talons display, so Larkin has been working hard on filling their large wholesale order... plus, summer market season is still in full swing. Larkin is enjoying this seasonal production work, but is looking forward to having a little more time to play with some new designs and techniques!
Licensed!
fun, musings, processCommentLarkin is licensed to drive! Life as a young entrepreneur just got a little less complicated. š
Owl Be Darned
fun, musings, process, product, venuesCommentAnother trip to the coast to get out of the wildfire smoke! Not a bad office view, eh?
Larkin is working on a design for a repeat customer at the Rogue Valley Growers & Crafters Market who likes to get something special for his daughter every month. He was hoping for an owl next. What do you think, cute caricature on the left or essence-capturing line work on the right?
Silver Swirls Ring
venues, product, processCommentLarkin just added this new ring design over at the Royaboya Handmade Bazaar! These rings are formed from 2 lengths of argentium silver wire, shaped and fused together. Measures about 2cm tall from balled tip to balled tip.
Speaking Of Books...
musings, process, product, venuesCommentGah! This is the sweetest! This is the book Larkin showed in the live video this morning before it had been oxidized and polished! This is made entirely out of copper and brass sheet metal, plus silver solder. It is hollow, so quite lightweight.
The copper cover is textured to look like aged leather, and the brass name plates are polished bright. The texture of the pages was created by scoring brass sheet metal with a knife blade. And yes, that *is* a jaunty little bookmark.
It's tiny! Measures 3cm tall (including the bookmark), 2.3 cm wide, and 0.8 cm thick.
On Reading
musings, process, venuesCommentIām not sure this will work, but I believe you can watch Larkinās video at this link whether you are on Facebook or not: https://www.facebook.com/100009820293574/videos/643221479990455
Larkin works on a tree of life while talking about being a late reader and how books have made Idle Talons possible.
Applegate Jade Wrap
process, product, venuesCommentHere's another applegate jade piece that shows just how versatile that stone is! It's almost black in the shade, deep green in bright light, and translucent green when back-lit! Larkin cut this cab from a stone our family found and wrapped it in swoops and swirls of oxidized copper. The finished piece measures 4.4 cm long and 3.2 cm at its widest point.
This piece will be available starting Friday at the Royaboya Handmade Bazaar, and if you visit the group at 11am Friday Larkin will be speaking a bit about how books and the written language have influenced Idle Talons!