Idle Talons

process

Biggs Jasper Tree of Life

product, processLarkin HamiltonComment

This piece was made from the very first cabochon that Larkin cut and polished! The story goes that the instructor at the rock shop gave the students common oval rough cut stones to learn on (very practical), but Larkin's first piece broke off its dop stick so they replaced it with a pretty gorgeous rough cut teardrop piece of black banded jasper.

The beautiful patterning on the stone is subtle and jumps out in direct light, while the stone appears almost obsidian black in the shade. The frame is shaped from copper which has been oxidized and polished until it gleams, adding amazing depth and texture to the piece. The tree is formed from bright silver that stands out brilliantly against the darker frame and stone.

firstcabtree-hand.1500.jpg
firstcabtree-woodblock.1500.jpg

Breezy Chert Scroll

process, productLarkin HamiltonComment

Larkin cut this petite cabochon from a last corner of this beautiful pale blue-green chert we found in northern California. The cab, slightly smaller than a penny, has a vein of quartz cutting across one side. The spiral scrollwork gives the wrap a light, ephemeral feeling, but this adornment of copper and stone is deceptively solid!

chertfairyscroll-cabbage.1500.jpg

Lace Agate Gate

product, process, musingsLarkin HamiltonComment

Larkin wanted to play with a door/gate design similar in organic feel to the leaves, and here is the prototype! Even the jump ring was soldered to complement the piece. Larkin has some ideas to modify the design, but I like how this arched lace agate cab looks like a gateway into a secret garden!

laceagatedoor-front.1500.jpg

Going On A Jade Hunt

musings, processLarkin HamiltonComment

We drove out to the Applegate yesterday, mostly for recreational reasons-- we never even saw another human outside of a car! For Larkin and Emile recreation = rockhounding. I am not, however, sure that Larkin's yoga swing rockhounding is going to catch on. ;)

They were wildly successful-- there are some super promising (BIG!) chunks of applegate jade I can't wait to see cut! I'm glad they knew what to look for after a trip out with the local rock club-- applegate jade almost always comes with a nondescript brownish crust that looks nothing like the gorgeous, glowing green stone within.

Ocean View Jasper

product, process, musingsLarkin HamiltonComment

Larkin cut this cabochon from a jasper stone we found near our home in southern Oregon. Larkin sees the crown of a tree in the foreground at the top, with beach, water, and sky below. What do you see? The negative space in the wrap neatly mirrors the negative space cut in the stone.

All photos are taken with the stone from which the cab was cut-- I love the way the copper wrap beautifully takes the place of the copper-colored crust on the rough stone. Bonus shot of my heckling, cackling audience as I tried to take photos: "Can we eats it, my precious?"

oceanviewjasper-roughstone.png
oceanviewjasper-edgeview.png
oceanviewjasper-back.jpg
temp.jpg

Leaves, Glorious Leaves!

process, product, musingsLarkin HamiltonComment

More leaves! These will be going live this evening as my churlish computer allows. ;) From top to bottom: applegate jade, serpentine, moss agate, green aventurine, chert, yellow jasper, mahogany obsidian. Also included a view of the backs since I don't think I've done that before. I learned that the leaf shape Larkin cuts these stones in is almost impossible to find at rock shops because the concave curves are difficult to achieve on polishing wheels-- traditional cabs have all convex curves. No wonder these always seem so unique! Larkin is now switching gears to a more complex wrap.

temp.jpg
collection-back.png

Layered Cab

musings, processLarkin HamiltonComment

Another day cutting and polishing cabochons! Larkin is playing with a new technique, inspired by a slab of rose quartz that is quite transparent when cut. Larkin backed it with a thin slice of obsidian so more of the color shows, including a couple of areas of blue flash that are apparently quite rare! Two of today's cabs are already wrapped into leaves, and most of these will follow suit. 

IMG_8526.jpg
IMG_8521.jpg
IMG_8520.jpg
IMG_8524.jpg

Quartz Moon Fox

product, process, musingsLarkin HamiltonComment

Larkin finished this locally found quartz cabochon with a matte polish to capture the soft glow of the moon. It is a rough, crystalline structure, and while you might not be able to see it with the naked eye, the cab does have some pocking/texture if you run your fingernail over the surface.

The adorable fox kit and its frame are constructed from copper wire which has been oxidized and polished. Idle Talons hereby formally acknowledges the customer’s right to see this as a wolf cub if desired. ;)

quartzfox-wood.png

Now That's Foxy

process, product, musingsLarkin HamiltonComment

Larkin has been playing with copper solder again and these little foxes are my new favorite thing. I dare anyone to hold the baby fox in their palm and not lapse into baby talk. Background is a wet hunk of applegate jade (hello rain, old friend!). I included a penny for scale and it may be a bit of a spoiler for what Larkin has in mind next…

temp.jpg

Sales Magic!

musings, process, product, venuesLarkin HamiltonComment

It's a bit odd having items disappear from a brick and mortar store without Larkin even being present-- we usually get a chance to say goodbye to each piece! These two wraps found their homes today-- lots more still available to see in person at Dragon Crystals! Larkin got a sales notification while socializing our chicks-- it seems to be working! ðŸ˜‚

temp.jpg
swingtree-jade-moss.png
ringrosequartz-moss.png

Mother's Day Commission

musings, process, productLarkin HamiltonComment

Those of you who have been around for awhile may remember when Larkin and Emile pulled this giant stone up a very steep and muddy bank. It turned out to be a pretty nice deep green chunk of serpentine. Here is Larkin's mother's day commission for a wrap using this stone. The customer requested a frame that complemented the stone without any wires going across the face.

temp.jpg
lauramaeserpentine-knot.jpg

Unexpected Treasure

process, product, musingsLarkin HamiltonComment

Larkin's having a machine day! Shaping and polishing a cabochon for a Mother's Day custom order, plus a few more leaf cabs since those keep disappearing. :) On a hike up our empty rural road yesterday, Larkin spotted some promising stones in the road cut. Seeing the polished end is enough to encourage us to go back and see if there's more! We're not sure what it is-- it's translucent like agate, but seems softer than agate. Looking forward to consulting the experts at the rock shop!

IMG_8439.JPG
IMG_8440.JPG
IMG_8441.JPG

Artist Of The Month

product, venues, process, musingsLarkin HamiltonComment

Idle Talons was named May's artist of the month at Dragon Crystals, our local rock and gem shop! This was made official several months ago, and of course timing could have been better given... well, the pandemic. They are open, so stop by if you're local and would like to see some of Larkin's work in person! Please observe social distancing and wear a mask. It was a fun challenge deciding on layout and which pieces to include in their display case, and a brick-and-mortar display feels like a bit of a milestone!

temp.jpg
temp2.jpg

Shipping Day!

product, processLarkin HamiltonComment

All these lovelies are now out for shipment or delivery! There's still time to get in on the action-- use the discount code MOTHER for 10% off all purchases until Mother's Day. :) (And no, your eyes don't deceive you-- there is a single earring in one order for a previous customer who lost one of a pair!)

temp.jpg